- ARCTIC launches their new all powerful AIO CPU liquid cooler with Liquid Freezer II. The award winning 120mm liquid cooler comes with PWM controlled pump and 1x 120mm fans optimized for static pressure of 2.2mm H2O.
- Compatible with both Intel and AMD, It performs effortlessly with over 200W of heat to be dissipated, which is why your CPU can be kept cool even in extreme overclocking. The water loop is sealed, therefore no water or additives have to be refilled.
- Equipped with an additional 40mm PWM VRM fan helps cooling the motherboards VRM Chips to prevent overheating of voltage transformers and the base area almost inaudibly by up to 15°C. The fan can be connected directly to the 38mm thick radiator.
- The liquids cooler is designed to have compatibility with Intel latest LGA 1700 socket (Kit Included), 1200, 115X, 2011-3, 2066 and AMD AM4 sockets.
Winning the "European Hardware Award 2020" for the best liquid cooler in the 240 variant, the ARCTIC Liquid Freezer II 240 is deigned to exceeds all expectations and has set new standards in the field of compact water cooling. It handles the entire cooling requirements even of the most powerful processors from Intel and AMD.
PWM Pumps and Fans
The pump is in-house developed tech and PWM controlled, leading to a significantly lower noise level at low and typical loads, but also to much lower power consumption, with a maximum of of 0.7W at no load, 2.1W under normal load and a maximum of 3.4W under full load for the entire AIO.
High Quality Hoses
The fibre-reinforced, long EPDM tubing of the Liquid Freezer II allows installation even in large cases and effectively prevents the coolant from evaporating. Hides the cables of your radiator fans and only have to connect a plug to the mainboard.
Premium Class Radiator
With 38 mm thick radiators with a high fin density. This means that a larger amount of water can be used in the circuit, and the cooling surface can be significantly increased.
Smooth VRM Fan
The fan is PWM-controlled and can cool your voltage transformers and the base area almost inaudibly by up to 15°C. This is especially effective in overclocking scenarios.
Fan Optimized Static Pressure
High static pressure for improved cooling performance with 2.2mm H2O. The fan comes with high quality plain bearing and the rubber bumpers helps in vibration reduction by 95%.
|Model||Liquid Freezer II 120|
|Fan||1x ARCTIC P12 – 120mm Fan|
|Fan Speed||200 – 1800 RPM|
|Fan Bearing||Fluid Dynamic Bearing|
|Noise Level||0.3 Sone|
|Voltage / Current||0.08 A / 12 V DC|
|Static Pressure||2.2 mm H2O|
|Connector||4 Pin Connector|
|VRM Fan||40mm, 1000 - 3000 RPM (PWM controlled)|
|Pump||800 – 2000 RPM (PWM controlled)|
|Power Consumption||0.5W – 2.7W (Pump + VRM Fan)|
|Cold Plate||Copper, Micro-Skived-Fins|
|Thermal Paste||MX-4 (0.8 g)|
|Compatibility||Intel: 1700 (Kit included), 1200, 115X, 2011-3, 2066
|Operating Temperature||0 - 40 °C|
|Radiator Dimensions||157 x 120 x 38 mm|
|Pump Dimensions||98 mm x 78 mm x 53 mm|
|Tube Length||350 mm|
|Warranty||6 Years of Warranty from the Manufacturer|
To claim the warranty for defects in materials or workmanship that have arisen during the warranty period, please contact Arctic Customer Service. Customer Service will provide you with further information on how to process the warranty claim.
Contact Customer Service:
Bevenroder Strasse 149
38108 Braunschweig, Germany
Tel.: 0531 / 60945294
Arctic can only grant claims under this warranty if you send the product along with the original receipt/original proof of purchase showing the date of purchase and the seller to the location specified by Customer Service (for example, to a repair center). The product must be properly packaged to avoid damage during shipping.
You are responsible for the cost of returning the device and Arctic will pay for the cost of sending the repaired or replaced device to you.
Arctic is not willing or obliged to participate in dispute resolution proceedings before a consumer arbitration board.