ARCTIC BioniX P120 A-RGB PWM 120mm CPU Case Cooling Fan Pack of 3 with Controller

• ARCTIC launches their new CPU Case ARGB Fan with BioniX P120 A-RGB 3x 120mm Fans and dedicated controller. The PWM controlled is designed with PST technology which allows that all of your fans listen to one control signal and to stand down at low load and spin up whenever necessary.
• The fan provides a rotational speed of up to 2300 rpm at a low noise level of 0.45 Sone. Developed with a motor which is a combination of alloy/lubricant gives reduced friction and noise. This makes the ideal solution for your silent working & gaming environment.
• The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage. Thus this bearing is as quiet as a sleeve bearing but comes with a significantly higher service life.
• The ARCTIC BioniX P120 A-RGB have a modular cable management and use two connections: a power-in and a connector output. ARCTIC uses an 8-pin connector for this, which forwards both the fan and lighting signals and considerably simplifies the cabling.
• The 12 A-RGB LEDs installed in the BioniX P120 A-RGB are autonomously controllable. The BioniX P120 A-RGB is compatible with the common A-RGB standards of leading motherboard manufacturers for the simplest possible use. It can therefore be fully illuminated directly via the A-RGB motherboard connection or via an external controller and synchronized with other hardware lighting.

~section~

PWM Fan

With a wide speed range and the connector functionality, the fan speed of the BioniX P120 A-RGB can be controlled synchronously with other fans. This reduces the noise development to a minimum while at the same time guaranteeing maximum cooling performance.

High Quality Plain Bearing

An alloy/lubricant combination helps reduced friction within the bearing and increasing efficiency. In this way, less heat is generated, there is less bearing noise and the service life of the fan is extended.

Static Pressure

The fan guarantees extremely efficient cooling, even with increased air resistance. This makes the BioniX P120 A-RGB particularly suitable for use on covered case vents or inlets with filters.

Minimum Vibration

Due to sinus magnetization, the P fan's motor generates only 5% of the commutation vibrations of a conventional DC motor. In addition, the ARCTIC BioniX P120 A-RGB has rubber pads on its contact surfaces for further decoupling.

Long Service Life

The ARCTIC BioniX P120 A-RGB have a modular cable management and use two connections: a power-in and a connector output. ARCTIC uses an 8-pin connector for this, which forwards both the fan and lighting signals and considerably simplifies the cabling. The included connector block also enables a wireless series connection.

~section~